EPOXY ADHESIVE KITS - RTV SEALANTS

 

Miller-Stephenson offers a diverse line of 2 part epoxy adhesive kits, and RTV silicone sealant/adhesive. These products achieve a specific property or combination of properties on solving customer application problems. They are easy to use, cure quickly and exhibit excellent bond strength for a broad range of materials.

Two-Part Epoxy Adhesive Kit

MS-907 (3.7 oz kit)

Nonflammable No ODC

For bonding metals, glass, ceramics, plastics, wood, rubber, fabrics and concrete. Miller-Stephenson's Epoxy 907 Adhesive System is a two-part, equal volume, room temperature curing system particularly useful for general purpose bonding. Fast setup time. Perfect for in-plant and field use. Develops bond strength to 3,000 psi. NSN 8040-00-144-9729.

  • Base: Epoxy Resin.
  • Bond strength To 3,000 psi.
  • Form: A two-part paste adhesive packaged in equal volume tubes
  • Color: Part A is blue. Part B is beige. When thoroughly mixed, the resultant color is pale gray
  • Viscosity: Approximately 120,000 cps, thixotropic.
  • Mixing ratio: Equal parts by volume
  • Cure: 24 hours at 77°F(25°C), or 2 hours at 140°F(60°C), or one hour at 180°F(82°C)
  • Pot life: 20 minutes at 77°F(25°C)
  • Service Temperature: Up to 180°F(82°C)
  • Special properties: Good adhesion to a wide variety of surfaces which have not been specially cleaned. Proportioning of Parts A and B not critical. Definite color change during mixing
  • Shelf life: More than one year at 75°F(24°C)

Product Information

RTV Silicone Sealant Adhesive

MS-900 (2.8 oz)

Nonflammable No ODC

A one-part, moisture-curing RTV silicone sealant/adhesive that cures to form a tough, permanent rubber seal or bond. It is ideal for protecting, sealing and insulating corrosion sensitive electronic and electrical materials such as copper, brass, silver, etc..

Product Information

 

5 Minute Set Epoxy Adhesive

MS-905 (50 ml)

Nonflammable No ODC

A versatile and easy to us adhesive. It can be used to bond or repair most materials such as wood, metal, glass, ceramic, plastics, and rubbers. It hardens in 5 minutes with high bond strength and chemical resistance.

Product Information

 

High Performance Epoxy Adhesive

MS-908 (50 ml)

Nonflammable No ODC

A two-part toughened epoxy adhesive. It is a one to one mix ratio by mass or volume and a long working life. Its creamy texture is sag resistant, making gap filling and application to vertical surfaces possible.

Product Information

 

Quick Set Epoxy Adhesive

MS-910 (50 ml)

Nonflammable No ODC

A two-component rapid setting epoxy adhesive, which produces strong bonds in a short period of time. Ideally suited for bonding small parts and for repair work.


Product Information

 
Back to top

To learn more about our latest formulations, please contact our Technical Service Department.USA:1.800.992.2424 Canada:1.800.323.4621